Salta al contenuto principale

Huawei Mate 8 Back Cover Replacement

Cosa ti serve

  1. Huawei Mate 8 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 2 Huawei Mate 8 Back Cover Replacement, Back Cover: passo 1, immagine 2 di 2
    • Switch off your phone and remove the SIM card tray.

  2. Huawei Mate 8 Back Cover Replacement: passo 2, immagine 1 di 1
    • Remove the Torx T2 screws from the bottom of the phone

  3. Huawei Mate 8 Back Cover Replacement: passo 3, immagine 1 di 2 Huawei Mate 8 Back Cover Replacement: passo 3, immagine 2 di 2
    • Use an iSclack or a suction handle in the bottom area of your phone to separate the display unit from the rear panel.

  4. Huawei Mate 8 Back Cover Replacement: passo 4, immagine 1 di 3 Huawei Mate 8 Back Cover Replacement: passo 4, immagine 2 di 3 Huawei Mate 8 Back Cover Replacement: passo 4, immagine 3 di 3
    • Use an opening pick to fully separate the clips, releasing the phone.

    • Do not fully remove the rear case. The fingerprint sensor cable is still connected to the back cover.

    • Open the phone like a book from the SIM tray side.

    • Use a spudger, to disconnect the fingerprint sensor cable.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

iFixit Membro di iFixit

Staff

136 Membri

16.574 Guide realizzate

2 Commenti

Question: If for some reason I accidentally cut the flex cable of the fingerprint sensor, can I replace the part? or it is like TouchID?

[deleted] - Replica

I agree, easy if if you own this suction device and know WTF a spudger is. Otherwise, what? :/

404cameljockey - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,957