Salta al contenuto principale

Introduzione

Microsoldering technique for replacing a faulty IC to restore touch functionality in the iPhone 6.

Strumenti

Ricambi

Nessuna parte specificata.

    • In this tutorial you will learn how to resolve hardware touch issue in an iPhone 6 smartphone. In case of any troubles contac me through the comments.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

Alex Sander

Membro da: 28/02/2017

36.783 Reputazione

202 Guide realizzate

8 Commenti

Do you change that ic with new one?

thanks before

aqsha asri - Replica

No, I have desoldered the proper chip from the other motherboard. Thanks for your interest and best luck with the repair!

Alex Sander -

Is it a good idea to change the whole screen

michael quartey - Replica

You are right, but sometimes it won’t work. Especially when it is a hardware issue.

Alex Sander -

? the logic board is not attached to the screen ... it has nothing to do with the screen, it is that - processor where one of the soldering points is not making contact and the tutorial shows just reheating to the point the soldering melts again and the crack or whatever that makes the connexion is broken gets fixed again, right?

Sven AERTS -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 53

Tutti i Tempi: 9,954