How to remove and clean the Dyson DC14 filter

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

Cosa ti serve

Passo 1 How to remove and clean the Dyson DC14 filter

How to remove and clean the Dyson DC14 filter, How to remove and clean the Dyson DC14 filter: passo 1, immagine 1 di 1

The filter is located in the canister of your vacuum.

Traduci

Passo 2

How to remove and clean the Dyson DC14 filter: passo 2, immagine 3 di 3

Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.
Remove the yellow filter housing.

Traduci

Passo 3

Remove the blue sponge-filter from the yellow filter housing.
The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.
Clean the blue sponge-filter in cold water until the water runs clear.

Traduci

Conclusione

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

Altre 17 persone hanno completato questa guida.