Aggiusta la tua roba Comunità Store

How to properly install the flex cable on the 4th Generation Touch

Introduzione

El objetivo de esta guía es analizar uno de los errores mas comunes en la instalación de la pantalla para el iPod touch 4.

English: The purpose of this guide is to analyze one of the most common mistakes in installing the screen to the iPod touch 4.

  1. How to properly install the flex cable on the 4th Generation Touch, How to properly install the flex cable on the 4th Generation Touch: passo 1, immagine 1 di 2 How to properly install the flex cable on the 4th Generation Touch, How to properly install the flex cable on the 4th Generation Touch: passo 1, immagine 2 di 2

    • Esta es la forma correcta de doblar el cable flex de la pantalla.

    • English: This is the correct way to bend the flex cable to the display.

    Traduci

  3. How to properly install the flex cable on the 4th Generation Touch: passo 2, immagine 1 di 1

    • No doblar el cable flex de esta forma.

    • English: Do not bend the flex cable this way.

    Traduci

  4. How to properly install the flex cable on the 4th Generation Touch: passo 3, immagine 1 di 1

    • Al doblar el cable flex de forma incorrecta la pantalla no entra completamente en el socket y se quiebra al tratar de cerrar el iPod.

    • English: When bending the flex cable incorrectly the screen does not fit completely into the socket and breaks when trying to close the iPod.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

fibocellphone

Membro da: 03/28/14

577 Reputazione

1 Guida realizzata

Distintivi: 6

+3 altri distintivi

Un commento

after replacing flex cable is not working so touch is not responding ,display is good ....how I can fix the touch.

Abhimanyu Raj - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 37

Tutti i Tempi: 7,199