Introduzione

This is a guide overview how to clean your VCR heads in your Panasonic DVD/VCR player.

Parti

Nessuna parte richiesta.

  1. With the front display of the device facing you, rotate the device 90 degrees counter clockwise.
    • With the front display of the device facing you, rotate the device 90 degrees counter clockwise.

    • Remove the screw that is on the right side of the panel facing you.

    • Now rotate the device 180 degrees and remove the second screw.

      • Remove all screws with a phillips head screwdriver.

    Aggiungi Commento

  2. Rotate the device so that the back faces you.
    • Rotate the device so that the back faces you.

    • With a phillips head screwdriver, locate and remove the 12 screws highlighted by the red circles in image one.

    Aggiungi Commento

    • Before removing cover make sure that the back of the device is facing you.

    • Remove the top cover by bending out on the sides, and pulling the cover towards you while applying upward pressure.

    Aggiungi Commento

    • Before cleaning the VCR heads, be sure that the front of the device is facing you with the top cover removed.

    • Locate the two VCR heads highlighted in by the blue boxes in image one.

    • GENTLY clean heads with a microfiber rag and a cleaning solution of your choice.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Nathan Cheadle

Membro da: 15/04/2010

137 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 16-5, Maness Spring 2010 Membro di Cal Poly, Team 16-5, Maness Spring 2010

CPSU-MANESS-S10S16G5

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,825