Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Before starting, make sure to turn off the camera and remove the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #00 screwdriver, remove the five outermost screws from the camera.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the front panel of the camera case to expose the top left ribbon cable. Pull the ribbon cable gently to disconnect it from the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #00 screwdriver remove the single screw on the far left-hand side towards the bottom of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pull the case apart to separate the 2 pieces.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws on the metal plate of the camera case. This will give you access to the spring inside the metal plate for further cleaning.
-
Clean the inside of the camera with a cloth to remove dust and excess grime. This should unstick the shutter button and allow for full function.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.