Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

How to clean the Canon PowerShot SD780 IS shutter button

Cosa ti serve

  1. How to clean the Canon PowerShot SD780 IS shutter button, How to clean the Canon PowerShot SD780 IS shutter button: passo 1, immagine 1 di 1
    • Make sure to turn off the camera and remove the battery.

  2. How to clean the Canon PowerShot SD780 IS shutter button: passo 2, immagine 1 di 1
    • Remove the five outermost Phillips #00 screws from the camera.

  3. How to clean the Canon PowerShot SD780 IS shutter button: passo 3, immagine 1 di 1
    • Remove the front panel of the camera case to expose the top left ribbon cable, and pull the ribbon cable gently to disconnect it from the camera.

  4. How to clean the Canon PowerShot SD780 IS shutter button: passo 4, immagine 1 di 1
    • Remove the single screw on the far left-hand side of the camera.

  5. How to clean the Canon PowerShot SD780 IS shutter button: passo 5, immagine 1 di 1
    • Carefully pull the case apart.

    • The case will detach from the camera in two pieces.

  6. How to clean the Canon PowerShot SD780 IS shutter button: passo 6, immagine 1 di 1
    • Remove the two screws on the metal plate. This will give you access to the spring inside the metal plate for further cleaning.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Arlene Ale

Membro da: 03/13/14

455 Reputazione

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 820