Salta al contenuto principale

How to clean the Brother HL-5240 corona wire

  1. How to clean the Brother HL-5240 corona wire, Drum Unit and Toner Cartridge: passo 1, immagine 1 di 1
    • Press the front cover release button.

    • Keep the button pressed and pull the cover toward yourself.

  2. How to clean the Brother HL-5240 corona wire: passo 2, immagine 1 di 3 How to clean the Brother HL-5240 corona wire: passo 2, immagine 2 di 3 How to clean the Brother HL-5240 corona wire: passo 2, immagine 3 di 3
    • With the front cover in the downward position, the drum & toner unit will be visible.

    • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

  3. How to clean the Brother HL-5240 corona wire, How to clean the Brother HL-5240 corona wire: passo 3, immagine 1 di 3 How to clean the Brother HL-5240 corona wire, How to clean the Brother HL-5240 corona wire: passo 3, immagine 2 di 3 How to clean the Brother HL-5240 corona wire, How to clean the Brother HL-5240 corona wire: passo 3, immagine 3 di 3
    • Clean the corona wire inside the drum unit by gently sliding the blue tab all the way to left and then back to the far right. Repeat several times.

    • Make sure the arrow on the tab lines up with the arrow on the drum unit before you place it back into the printer. If the tab is in the wrong place, a vertical line might appear on future print jobs.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Nathan Ruiz

Membro da: 01/14/10

165 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 4-14, Forte Winter 2010 Membro di Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 26

Tutti i Tempi: 13,152