Parti

Nessuna parte richiesta.

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    Aggiungi Commento

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    Aggiungi Commento

    • Unscrew the 3 screws in the back.

    Aggiungi Commento

    • Pull the outer case upward and then towards you.

    Aggiungi Commento

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    Aggiungi Commento

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    Aggiungi Commento

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    Aggiungi Commento

    • Remove the three screws holding in the DVD tray

    Aggiungi Commento

    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

    Aggiungi Commento

    • Gently lift the DVD tray off of the motherboard.

    Aggiungi Commento

    • Use the tweezers to make sure all the buttons aren't stuck.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Mitchell Hart

Membro da: 21/01/2011

819 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 3-30, Regan Winter 2011 Membro di Cal Poly, Team 3-30, Regan Winter 2011

CPSU-REGAN-W11S3G30

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,231