Aggiusta la tua roba Comunità Store

How to Wind a Bobbin on a Brother LX3817 Sewing Machine

Introduzione

This guide will demonstrate how to wind a bobbin using a Brother LX3817 sewing machine.

Respooling a bobbin is easy with the Brother LX3817 Sewing Machine. This guide requires a plastic spool to rethread and scissors to cut excess thread between steps.

In the process of respooling, you will be working with a sewing needle attached to the machine. This needle is sharp and may cause injuries if not handled properly. Be sure to pay close attention to each step to ensure the best accuracy and least resistance is implemented.

Cosa ti serve

  1. How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 1, immagine 1 di 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 1, immagine 2 di 2

    • Pull up the spool pin.

    Modifica

  2. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 2, immagine 1 di 1

    • Place the spool of thread on the spool pin.

    Modifica

  3. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 3, immagine 1 di 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 3, immagine 2 di 2

    • Pull the thread through the hoop.

    Modifica

  4. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 4, immagine 1 di 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 4, immagine 2 di 2

    • Align the spool notch to the projection by moving it to the left.

    Modifica

  5. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 5, immagine 1 di 1

    • Insert an empty bobbin spool onto the spool notch.

    Modifica

  7. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 6, immagine 1 di 1

    • Sew the thread through the top hole.

    • Leave 1 inch of thread from the top hole on the bobbin.

    Modifica

  8. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 7, immagine 1 di 1

    • Cut the excess thread past the 1 inch mark.

    Modifica

  9. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 8, immagine 1 di 1

    • Push the bobbin winder to the right.

    Modifica

  10. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 9, immagine 1 di 1

    • Loop the string around the bobbin.

    Modifica

  11. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 10, immagine 1 di 3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 10, immagine 2 di 3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 10, immagine 3 di 3

    • Turn on the power button of the machine.

    • 0 means off and 1 means on.

    Modifica

  12. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 11, immagine 1 di 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 11, immagine 2 di 2

    • Press down on the foot pedal.

    Modifica

  13. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 12, immagine 1 di 2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 12, immagine 2 di 2

    • Lift your foot off of the pedal to stop winding.

    Modifica

  14. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: passo 13, immagine 1 di 1

    • Cut excess thread.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Justin Barren

Membro da: 02/21/23

217 Reputazione

1 Guida realizzata

Distintivi: 3

Team

University of North Texas, Team 2-14, Raign Spring 2023 Membro di University of North Texas, Team 2-14, Raign Spring 2023

UNT-RAIGN-S23S2G14

3 Membri

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 46

Tutti i Tempi: 634