Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Fit the wheel into the wheel truing stand. It doesn't matter which way the wheel is facing.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Bring the calipers up until the teeth are are about half an inch from the metal rim of the wheel.
-
Start the wheel spinning slowly.
-
Slowly tighten the calipers until they contact the wheel on one side or the other.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the spoke nipples that attach to the same side of the wheel that the caliper is touching. At the same time, tighten the spokes that attach to the opposite side of the hub.
-
As a starting point, turn all the spokes half of a turn for each of the spokes near the caliper contact point.
-
Spin the wheel. Tighten the calipers again until they touch the rim on only one side at a time at certain point. Repeat steps 2-3 until the caiplers touch both sides of the rim evenly at every point on the rim.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.