Aggiusta la tua roba Comunità Store

How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro

Introduzione

The fader arm is made of an easily bendable metal. Because of this, small bumps or a push in the wrong direction can accidentally bend the arm. This guide will show you how to bend the arm back to its proper alignment.

Cosa ti serve

  1. How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro, How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro: passo 1, immagine 1 di 1

    • Remove the fader cap from the bent fader arm

    Traduci

  3. How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro: passo 2, immagine 1 di 2 How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro: passo 2, immagine 2 di 2

    • Use needle nose pliers to hold the fader arm in position.

    • Gently straighten the fader arm.

    Traduci

  4. How to Straighten a Bent Fader Arm on a Mackie 1402-VLZ Pro: passo 3, immagine 1 di 1

    • Place the fader cap back on the fader arm.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 19

Tutti i Tempi: 81