Salta al contenuto principale

Cosa ti serve

  1. How to Sharpen Troy-Bilt TB110 Lawnmower Blades, How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 1, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades, How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 1, immagine 2 di 2
    • Disconnect the spark plug wire.

    • This step is critical to avoid an accidental startup since we are working on the blade.

  2. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 2, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 2, immagine 2 di 2
    • Put saran wrap on the inside of the gas cap.

    • This is done to prevent gas from spilling out when we turn over the lawnmower.

  3. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 3, immagine 1 di 1
    • Turn the lawn mower over on its side.

  4. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 4, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 4, immagine 2 di 2
    • Use a 5/8 ratchet or wrench to remove the bolt. Then remove the blade.

    • Note how the blade is oriented on the lawn mower for reassembly.

    • Do not grab it from the sharp parts of the blade.

  5. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 5, immagine 1 di 1
    • Clean the blade with a scraper or a wire brush to remove grass residue .

  6. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 6, immagine 1 di 1
    • Secure the blade in a vice.

  7. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 7, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 7, immagine 2 di 2
    • Sharpen the blade with a file or with a grinder. Follow the angle that is already established and move the file along until the edge becomes sharp.

    • Be carful when checking for sharpness. You can very gently run your finger along the edge to check.

    • The blade does not need to be as sharp as a razor blade. Try to make it as sharp as pair of scissors. Check the lawnmower for specific details.

  8. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 8, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 8, immagine 2 di 2
    • Put the blade back onto the lawn mower and screw the bolt back on while safely securing the blade.

    • Again be careful not to hold the blade by the sharp edges.

  9. How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 9, immagine 1 di 2 How to Sharpen Troy-Bilt TB110 Lawnmower Blades: passo 9, immagine 2 di 2
    • Flip the lawn mower back to the upright position and remove the saran wrap from the gas cap.

    • Plug the spark plug wire in until you hear a click.

Linea Traguardo

Andrew DePari

Membro da: 24/03/2021

169 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 19

Tutti i Tempi: 468