Salta al contenuto principale

How to Restore a Torn Nike Flip-Flop

Cosa ti serve

  1. How to Restore a Torn Nike Flip-Flop, How to Restore a Torn Nike Flip-Flop: passo 1, immagine 1 di 1
    • Remove all rough edges with 120 grit sandpaper from the torn parts of the flip-flop.

  2. How to Restore a Torn Nike Flip-Flop: passo 2, immagine 1 di 2 How to Restore a Torn Nike Flip-Flop: passo 2, immagine 2 di 2
    • Clean off any additional residue with soap, water, and a towel or toothbrush.

    • Allow the flip-flop to air dry before moving on.

  3. How to Restore a Torn Nike Flip-Flop: passo 3, immagine 1 di 1
    • Gently apply the adhesive on the torn parts of the flip-flop.

    • Make sure the torn parts are completely covered. Overspill is okay.

    • Connect and hold the parts of the flip-flop to the adhesive with your hands for 5 minutes. After the 5 minutes the adhesive will be hard enough to let it sit. Let the adhesive dry for 24 hours.

    • Be sure to wear gloves and be in a ventilated environment when applying the adhesive.

  4. How to Restore a Torn Nike Flip-Flop: passo 4, immagine 1 di 1
    • Once the adhesive is dry remove any extra adhesive that might have spilled over with the sandpaper.

  5. How to Restore a Torn Nike Flip-Flop: passo 5, immagine 1 di 3 How to Restore a Torn Nike Flip-Flop: passo 5, immagine 2 di 3 How to Restore a Torn Nike Flip-Flop: passo 5, immagine 3 di 3
    • Take the needle and thread and begin to sew a cross stitch from the strap to the torn part of the flip-flop.

    • It may be easier to use an upholstery needle to get through the rubber material.

  6. How to Restore a Torn Nike Flip-Flop: passo 6, immagine 1 di 1
    • Cover the stitched region with Plasti Dip.

    • Allow 4 hours to dry.

    • Make sure to apply the Plastic Dip in a proper environment with venalation or outside.

Conclusione

The Nike Flip-Flop(s) are now restored and can be worn again.

Altre 7 persone hanno completato questa guida.

Adrian Yearby

Membro da: 07/12/17

265 Reputazione

1 Guida realizzata

Team

Texas Tech, Team S1-G2, Rauch Summer 2017 Membro di Texas Tech, Team S1-G2, Rauch Summer 2017

TTU-RAUCH-SU17S1G2

2 Membri

1 Guida realizzata

2 Commenti

Hi Andrew! Thank you so much for this example. What kind of adhesive did you use, because there are so many versions. Thank you.

masood daud - Replica

Oh darn I see it now.lol

masood daud - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 47

Tutti i Tempi: 15,499