Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Begin with an old chair frame.
-
Using your sandpaper, rub any marks or scuffs off the wood.
-
Always rub with the grain of the wood.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the cleaning cloth to wipe off any excess dirt and dust.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Holding the spray paint 6-12 inches away from the chair, apply a light coat of paint.
-
Allow it to dry for about 5 minutes.
-
Apply a second light coat over the front of the chair and allow it to dry for 10 minutes.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the chair over.
-
Repeat step 3 for the back side.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While the paint dries, work on the seat.
-
Grab the wood board and set it down.
-
Grab the desired cushion and rest it on top of the board.
-
Make sure to align all four corners of the wood to the corners of the cushion.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now grab the cushion cover.
-
Place your cover on top of the cushion, aligning all four corners.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the stack of wood, cushion and cover and flip it over.
-
Align them so they stack up evenly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Fold the sides of the cover over the board and cushion keeping them as close to the center of the board as possible.
-
Select a side to start on.
-
With the staple gun, staple the end of the cushion cover you are holding into the board.
-
Rotate the board and staple down the other side.
-
Continue to staple down the sides, placing staples about 1 inch apart.
-
Fold the corners in and staple them onto the board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Make sure that the paint on the chair frame has completely dried up.
-
Grab your newly covered cushion and place it on the seat of the chair frame.
-
Holding on to both the cushion and the frame, flip the chair over.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the screws in the screw holes.
-
Tighten the screws with the philips screw driver.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
2 Commenti
Hi, I have a aoks chair I want to restore can you please help