Introduzione

Reshaping the contact point electrodes which hold bObi's dustbin in place can resolve installation and bin latching difficulties.

Remove bObi's dustbin:
  • Remove bObi's dustbin:

    • Push down on the button found on bObi's back to release the dustbin.

Aggiungi Commento

Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.
  • Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.

  • Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.

Aggiungi Commento

  • When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.

  • Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chelsea

Membro da: 24/09/2014

2.278 Reputazione

31 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 122