Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Identify the headshell by opening the turntable dust cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Identify the stylus (needle housing) on the headshell and gently remove it from the cartridge by wiggling it carefully. Dispose of the stylus.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the tonearm weight located at the base of the headshell. While holding the headshell, turn the tonearm weight to the right to disconnect the headshell from the tonearm.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver and remove the screws to free the cartridge. Retain the screws for reinstallation.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the wires on the underside of the headshell and carefully disconnect the wires from the pins of the cartridge.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Replace with a new cartridge by plugging the pins of the new cartridge into the wires.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Phillips #0 screwdriver, re-screw the cartridge into the headshell the same way it was removed.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a new stylus (needle housing) into the cartridge before remounting the headshell onto the tonearm.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Connect the newly assembled headshell into the tonearm and tighten until secure.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Test the new needle and allow for a break-in period.
-
Annulla: non ho completato questa guida.
Altre 9 persone hanno completato questa guida.
2 Commenti
Just commenting to disagree with above. Excellent tutorial and my audio technical cartridge and headshell are similar so it solved my issue. Thanks for the article.