Introduzione
This step-by-step guide shows how to replace the shower door seal found at the bottom of the shower door. Generally speaking, the shower door seal strip should be replaced every 1-2 years; however, also consider replacing it if it is torn, cracked, or too dirty.
Cosa ti serve
-
-
Remove the old shower door seal by sliding it off the door.
Chiedi a FixBot
-
-
-
Clean the area where the old seal was at the bottom of the shower door.
-
-
-
-
Mark how long the new shower door seal should be per the previous measurement.
-
-
-
Cut the new shower door seal on the mark placed in the previous step.
-
-
-
Sand/Smooth Off the side of the seal that was cut in previous step.
-
-
-
Slide the new seal on with the deflector facing the inside of the shower.
-
To reassemble your device, follow these instructions in reverse order.
Team
CSU Los Angeles, Team 5-5, Kershman Fall 2023 Membro di CSU Los Angeles, Team 5-5, Kershman Fall 2023
CSULA-KERSHMAN-F23S5G5
Membro di 1
3 guide realizzate
