Salta al contenuto principale

How to Repair a Broken Windowsill

Cosa ti serve

  1. How to Repair a Broken Windowsill, How to Repair a Broken Windowsill: passo 1, immagine 1 di 3 How to Repair a Broken Windowsill, How to Repair a Broken Windowsill: passo 1, immagine 2 di 3 How to Repair a Broken Windowsill, How to Repair a Broken Windowsill: passo 1, immagine 3 di 3
    • Remove any loose, splintered, or jagged wood by hand.

  2. How to Repair a Broken Windowsill: passo 2, immagine 1 di 3 How to Repair a Broken Windowsill: passo 2, immagine 2 di 3 How to Repair a Broken Windowsill: passo 2, immagine 3 di 3
    • Grab three straight sections of cardboard.

    • Apply Vaseline to one side of each section of cardboard by hand. Vaseline will prevent the wood filler from sticking to the cardboard.

  3. How to Repair a Broken Windowsill: passo 3, immagine 1 di 1
    • Hold one section of cardboard underneath the corner needing repair with the Vaseline side facing up.

  4. How to Repair a Broken Windowsill: passo 4, immagine 1 di 2 How to Repair a Broken Windowsill: passo 4, immagine 2 di 2
    • Apply wood filler to the corner by squeezing the tube.

  5. How to Repair a Broken Windowsill: passo 5, immagine 1 di 3 How to Repair a Broken Windowsill: passo 5, immagine 2 di 3 How to Repair a Broken Windowsill: passo 5, immagine 3 di 3
    • Position the other two sections of cardboard on either side of the corner to help shape the filler into a right angle. Place the sides with the Vaseline on them toward the filler.

    • Use a putty knife or plastic butter knife to smooth filler if needed.

  6. How to Repair a Broken Windowsill: passo 6, immagine 1 di 1
    • Remove the cardboard sections before the filler dries completely.

    • Allow the filler to dry for approximately six hours. The filler may take less time to dry if repairing a smaller section of the apron. For dime sized reparations, the filler will take approximately two hours to dry.

  7. How to Repair a Broken Windowsill: passo 7, immagine 1 di 2 How to Repair a Broken Windowsill: passo 7, immagine 2 di 2
    • Sand the filler with 120 grit sandpaper until it is satisfactory.

    • Repeat steps 4-7 if the corner is not the desired shape.

  8. How to Repair a Broken Windowsill: passo 8, immagine 1 di 2 How to Repair a Broken Windowsill: passo 8, immagine 2 di 2
    • Paint the finished corner with the desired shade of paint.

    • Allow the paint 3 hours to completely dry.

Conclusione

Once the paint dries, the project is complete.

Julia Byrd

Membro da: 03/03/21

157 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 15

Ultimi 7 Giorni: 80

Ultimi 30 Giorni: 264

Tutti i Tempi: 5,328