Salta al contenuto principale

Introduzione

I have a broken cabinet door that was accidentally, snapped into two sections. I plan to use a two part 5 minute epoxy, with wood bonding compatibility and duct tape to help hold the two sections together while the epoxy cures. With this simple process I will have a fully repaired cabinet door in under 30 minutes.

Strumenti

Parti

Nessuna parte specificata.

  1. This is the broken dresser drawer, duct tape & 5 minute 2 part wood epoxy.
    • This is the broken dresser drawer, duct tape & 5 minute 2 part wood epoxy.

  2. Take a piece of duct tape and put it on both sides for extra bonding support. Only put the tape on the bigger part of the dresser  door for now.  You will attach the other side with tape in a later step. Take a piece of duct tape and put it on both sides for extra bonding support. Only put the tape on the bigger part of the dresser  door for now.  You will attach the other side with tape in a later step.
    • Take a piece of duct tape and put it on both sides for extra bonding support. Only put the tape on the bigger part of the dresser door for now. You will attach the other side with tape in a later step.

  3. This is a 5 minute  quick setting 2 part wood epoxy. Take the top off the epoxy.  Connect the syringe tip and lock it in place. Press the plunger so you can fill the needle tip with epoxy. This is a 5 minute  quick setting 2 part wood epoxy. Take the top off the epoxy.  Connect the syringe tip and lock it in place. Press the plunger so you can fill the needle tip with epoxy. This is a 5 minute  quick setting 2 part wood epoxy. Take the top off the epoxy.  Connect the syringe tip and lock it in place. Press the plunger so you can fill the needle tip with epoxy.
    • This is a 5 minute quick setting 2 part wood epoxy. Take the top off the epoxy. Connect the syringe tip and lock it in place. Press the plunger so you can fill the needle tip with epoxy.

  4. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  5. Run a thick bead of epoxy on the inside rim of the cabinet from one end to the other. Run a thick bead of epoxy on the inside rim of the cabinet from one end to the other. Run a thick bead of epoxy on the inside rim of the cabinet from one end to the other.
    • Run a thick bead of epoxy on the inside rim of the cabinet from one end to the other.

  6. Run a thick bead of epoxy on the inside rim of the smaller piece of cabinet door.
    • Run a thick bead of epoxy on the inside rim of the smaller piece of cabinet door.

  7. Attach and align the smaller cabinet door section to the bigger cabinet door section. Press them firmly together and apply the duct tape on both ends for bonding support. Attach and align the smaller cabinet door section to the bigger cabinet door section. Press them firmly together and apply the duct tape on both ends for bonding support. Attach and align the smaller cabinet door section to the bigger cabinet door section. Press them firmly together and apply the duct tape on both ends for bonding support.
    • Attach and align the smaller cabinet door section to the bigger cabinet door section. Press them firmly together and apply the duct tape on both ends for bonding support.

  8. Flip door over to front side and tape both ends of the cabinet. This will add more support while it is drying. Flip door over to front side and tape both ends of the cabinet. This will add more support while it is drying. Flip door over to front side and tape both ends of the cabinet. This will add more support while it is drying.
    • Flip door over to front side and tape both ends of the cabinet. This will add more support while it is drying.

  9. After at least 15 minutes you can pull tape off completely and wipe away any excess epoxy. It is now finished and ready to be re-installed back to the cabinet. After at least 15 minutes you can pull tape off completely and wipe away any excess epoxy. It is now finished and ready to be re-installed back to the cabinet. After at least 15 minutes you can pull tape off completely and wipe away any excess epoxy. It is now finished and ready to be re-installed back to the cabinet.
    • After at least 15 minutes you can pull tape off completely and wipe away any excess epoxy. It is now finished and ready to be re-installed back to the cabinet.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Calvesta Walk

Membro da: 07/02/2016

173 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 42

Ultimi 30 Giorni: 178

Tutti i Tempi: 3,361