Salta al contenuto principale

How to Repair Timex t121b Buttons

Cosa ti serve

  1. How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: passo 1, immagine 1 di 3 How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: passo 1, immagine 2 di 3 How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: passo 1, immagine 3 di 3
    • Unplug the alarm clock from the power.

    • Flip the alarm clock upside down and open the lid.

    • Take out the batteries and leave them aside.

  2. How to Repair Timex t121b Buttons: passo 2, immagine 1 di 3 How to Repair Timex t121b Buttons: passo 2, immagine 2 di 3 How to Repair Timex t121b Buttons: passo 2, immagine 3 di 3
    • Use a Phillips screwdriver to remove all of the screws on the underside of the clock.

    • Carefully lift the cover and lay it down as shown in the third image.

  3. How to Repair Timex t121b Buttons: passo 3, immagine 1 di 3 How to Repair Timex t121b Buttons: passo 3, immagine 2 di 3 How to Repair Timex t121b Buttons: passo 3, immagine 3 di 3
    • Flip the alarm clock until the top of the clock is facing down.

    • Take out the first screw (1.2 mm Phillips) as shown in the second image.

    • Take out the second screw (1.2 mm Phillips) as shown in the third image.

  4. How to Repair Timex t121b Buttons: passo 4, immagine 1 di 3 How to Repair Timex t121b Buttons: passo 4, immagine 2 di 3 How to Repair Timex t121b Buttons: passo 4, immagine 3 di 3
    • Carefully check the buttons and make sure you are able to press all the buttons.

    • Clean any dust that might be interfering with the buttons.

    • Adjust and push the alarm slide button to its proper position as shown in the third image.

  5. How to Repair Timex t121b Buttons: passo 5, immagine 1 di 3 How to Repair Timex t121b Buttons: passo 5, immagine 2 di 3 How to Repair Timex t121b Buttons: passo 5, immagine 3 di 3
    • Put the board back in place and place the first screw (1.2 mm Phillips) as shown in the first image.

    • Place the second screw (1.2 mm Phillips) as shown in the second image.

    • Carefully place the two halves of the clock back together and put all 4 screws (1.2 mm Phillips) as shown in the third image.

    • Open the back lid and place the batteries.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jad Abdalnor

Membro da: 01/18/22

121 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 23

Tutti i Tempi: 259