How to Remove Stock Stereo Head Unit in a Toyota Tacoma

Introduzione

Follow this guide to remove the stock stereo head unit from the dash of Toyota Tacoma’s originating after 2016. This procedure includes the removal of the stereo from the dash of the vehicle and does not include information on installing an aftermarket unit.

Cosa ti serve

Passo 1 Bezel Removal

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Bezel Removal: passo 1, immagine 1 di 2

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Bezel Removal: passo 1, immagine 2 di 2

Ensure that the vehicle is off and the battery is disconnected.
Remove the plastic trim pieces by pulling them straight back.
Pulling from behind the vents on each side one at a time is the smoothest way to pull the panel off.

Modifica

Passo 2 Unbolting the Unit

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Unbolting the Unit: passo 2, immagine 1 di 2

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Unbolting the Unit: passo 2, immagine 2 di 2

Unscrew the four bolts on the sides of the stereo using a 10 mm socket with a ratchet or an impact driver.

Modifica

Passo 3 Removing the Stereo from the Dash

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Removing the Stereo from the Dash: passo 3, immagine 1 di 1

Carefully remove the stereo out of the dash to expose the wires in the back of the unit.

Modifica

Passo 4 Disconnecting the Wiring

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: passo 4, immagine 1 di 3

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: passo 4, immagine 2 di 3

How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: passo 4, immagine 3 di 3

Remove all 9 wires from the back of the stereo by pushing down the safety clips and set the unit aside.
Have someone hold the stereo while disconnecting the wires.

Modifica