Salta al contenuto principale

Strumenti

  1. Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.
    • Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.

  2. Wipe the shoe polish over the panel. This fills the scratches with polish.
    • Wipe the shoe polish over the panel. This fills the scratches with polish.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.
    • Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.

  5. Polish out the sanding scratches with rubbing compound.
    • Polish out the sanding scratches with rubbing compound.

  6. A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.
    • A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.

    • Don't buff through the paint into the next layer, especially on high-crown or sharp edges.

  7. Finish with light hand buffing to remove the last of the compound. Follow with car wax.
    • Finish with light hand buffing to remove the last of the compound. Follow with car wax.

Linea Traguardo

Altre 17 persone hanno completato questa guida.

Brian Sallee

Membro da: 07/03/2012

1.760 Reputazione

1 Guida realizzata

Team

iFixit Membro di iFixit

Community

101 Membri

9.031 Guide realizzate

Don’t you need to put the clear coat on the paint before waxing?

Richard E Riman - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 76

Tutti i Tempi: 7,827