Introduzione

If you need to access laptop internals such as the RAM, hard drive, or the motherboard, this guide will show you how to safely open the laptop for access to these components.

Parti

Nessuna parte richiesta.

  1. Flip the laptop over, such that the bottom of the laptop is facing upwards.
    • Flip the laptop over, such that the bottom of the laptop is facing upwards.

    • Ensure that the laptop is powered off prior to following this guide.

    Aggiungi Commento

  2. Pull the latch to the right of the battery to the right.
    • Pull the latch to the right of the battery to the right.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Pull the latch to the left of the battery to the left. Hold the latch open with a finger to prevent it from closing.

    Aggiungi Commento

    • While holding the second latch from the previous step, use another hand to reach underneath the battery.

    • Pull the battery upwards and away from the laptop to remove it.

    Aggiungi Commento

    • Using a phillips J00 screwdriver, unscrew the two 2.5 mm screws on either side of the laptop panel.

    • The head size of these screws is 2.5 mm, the length is 5 mm.

    Aggiungi Commento

    • Remove the panel by pushing away from the laptop until the panel is free of the laptop.

    • Lift to remove the panel.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Elliott Beckner

Membro da: 05/11/2018

129 Reputazione

2 Guide realizzate

Team

IUPUI, Team S2-G1, Baechle Fall 2018 Membro di IUPUI, Team S2-G1, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G1

4 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 10