Introduzione

The hard water stains can easily be removed using common household items: white vinegar, a spray bottle, and a sponge.

Parti

Nessuna parte richiesta.

  1. Fill the spray bottle with mixture of water and white vinegar (approx 50/50). Fill the spray bottle with mixture of water and white vinegar (approx 50/50).
    • Fill the spray bottle with mixture of water and white vinegar (approx 50/50).

  2. Spray the solution on to the glass with the bottle.
    • Spray the solution on to the glass with the bottle.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Wipe the solution on the door with the damp sponge.
    • Wipe the solution on the door with the damp sponge.

  5. Let the solution sit on the door for several minutes.
    • Let the solution sit on the door for several minutes.

  6. Keep applying the solution as it dries.
    • Keep applying the solution as it dries.

    • Keep the door wet for at least 5 minutes.

  7. Rinse the solution off the door with warm water. If the results are not satisfactory, try adding more vinegar to the solution and go back to step 1.
    • Rinse the solution off the door with warm water.

    • If the results are not satisfactory, try adding more vinegar to the solution and go back to step 1.

Conclusione

Congratulations! You now have a sparkling clean glass shower door!

Altre 20 persone hanno completato questa guida.

Matthew Johnson

Membro da: 23/02/2015

794 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 12-5, Green Winter 2015 Membro di Cal Poly, Team 12-5, Green Winter 2015

CPSU-GREEN-W15S12G5

3 Membri

6 Guide realizzate

I've found that making a solution of 80% White Vinegar and 20% Dawn detergent works well. I keep a gallon batch handy. When needed I heat 1 cup in the microwave to 150-160 degrees (F) and transfer it into a 1 quart spray bottle, that has been insulated by wrapping it with a hand towel, secured with two large rubber bands. Before using the heated Vinegar/Dawn solution, I first spray the room temperature solution onto the glass block walls of the shower, and scrub gently with a green scotchbrite sponge. I leave the lathered glass block sit while I heat the cup full. Then, I hose down the glass with scalding hot water. Next, I spray a liberal coating of the hot solution (top to bottom) & let it sit for 5-10 minutes, before rinsing it off with scalding water. The detergent helps the vinegar-foam cling better to the glass surface. It also works on fixtures, stone and ceramic surfaces. BONUS! It works wonders on windshields after a winter of salt and sanded roads too!

Vincenzo M Catalanotti - Replica

This is bullshit. I have tried this on my shower doors that had not been cleaned for 3 months and it did not do anything.

Maybe this works if you have not cleaned them for a few days but once the hard water is ground in I am not sure what to do.

vicror - Replica

Most people don't know that there's a difference between Stage I Corrosion (a mineral buildup on the glass) and Stage II Corrosion (etching and damage to the glass). I've written a blog post about it that gives a very thorough explanation of what it is and how to get rid of it because I couldn't find this information anywhere on the internet without flitting between like 20 different web forums.  http://pristinecleaning.com.au/2018/01/2...

Jay Rawcliffe -

Hello, your product that cleans stubborn water stains, especially on shower doors, I'm really interested in this product. I've tested this out at home and it works wonders. I would like to purchase this product as OEM/wholesale. I'm the owner of First Saram Inc, it's a trading company. If it is possible, I would like to change it to my company name and a design that I like, if possible. If you have other items that is great, please let me know. I'm very interested. I hope to hear back, thank you

Mtradinginc70@gmail.com

Bok min - Replica

Hello, your product that cleans stubborn water stains, especially on shower doors, I'm really interested in this product. I've tested this out at home and it works wonders. I would like to purchase this product as OEM/wholesale. I'm the owner of First Saram Inc, it's a trading company. If it is possible, I would like to change it to my company name and a design that I like, if possible. If you have other items that is great, please let me know. I'm very interested. I hope to hear back, thank you

Bok min - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 106

Ultimi 7 Giorni: 835

Ultimi 30 Giorni: 3,351

Tutti i Tempi: 193,256