Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

These instructions provide a simple technique for reattaching a broken piece of wood to any type of furniture. We demonstrate this technique on a nightstand, but it can be used on any wooden surface that needs to be fixed. No carpentry skill is required to complete this repair.

  1. Dust the surface of the fragment and the damaged area of the furniture. Any household cleaner will work; we recommend a damp rag.
    • Dust the surface of the fragment and the damaged area of the furniture.

    • Any household cleaner will work; we recommend a damp rag.

    • Clean carefully, making sure not to cause further damage by splintering the fragment.

  2. Check that the fragment fits well into the break in the furniture. If the fragment does not fit perfectly, cut away any irregular slivers on the fragment using a utility knife to achieve as neat of a fit as possible.
    • Check that the fragment fits well into the break in the furniture.

    • If the fragment does not fit perfectly, cut away any irregular slivers on the fragment using a utility knife to achieve as neat of a fit as possible.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Apply glue to both the fragment and the furniture. Check that the glue is spread evenly throughout both pieces. Using a brush to spread the glue to all crevices is most effective.
    • Apply glue to both the fragment and the furniture.

    • Check that the glue is spread evenly throughout both pieces.

    • Using a brush to spread the glue to all crevices is most effective.

  5. Insert the wood fragment into the glued spot on the furniture. Insert the wood fragment into the glued spot on the furniture.
    • Insert the wood fragment into the glued spot on the furniture.

  6. Wipe away any excess glue using a damp rag. Be careful not to move the fragment out of alignment as you are wiping.
    • Wipe away any excess glue using a damp rag.

    • Be careful not to move the fragment out of alignment as you are wiping.

  7. Clamp the two pieces together. You can use any type of clamp that you have on hand. If you don't have a clamp, any type of clip would work.
    • Clamp the two pieces together.

    • You can use any type of clamp that you have on hand. If you don't have a clamp, any type of clip would work.

    • Wait 30 minutes for the glue to dry before removing the clamp.

    • Be careful not to bump the fragment out of alignment as you are clamping.

Conclusione

Continue using furniture as you had before!

Altre 3 persone hanno completato questa guida.

Thank you for the post. It will help me with the leg if a cigar table. However, a piece of wood broke off the front of my mom’s cedar chest and I won’t be able to use a clamp. What do you recommend?

Amanda - Replica

The clean and modern design of our products allows you to use the items for years. we are starting to sale small products and want to get your feedback for these products. We are not the World best online store but we want to be and this is only possible with your response and recommendation.

anita.6j - Replica

Very easy to follow instructions. I've found the most difficult part of any fence build is getting the posts lined up properly and getting them plumb. Even with a line, it can be tough . https://www.whitewooden.com/

White Wooden - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 57

Ultimi 30 Giorni: 376

Tutti i Tempi: 11,651