Salta al contenuto principale
  1. Shutdown your phone Get out the rear case of your phone Unscrew all screws identified in red on the photo
    • Shutdown your phone

    • Get out the rear case of your phone

    • Unscrew all screws identified in red on the photo

    • Remove all plastic pieces using your nails or a plastic tool

  2. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  3. Unstick careflly the 3 metal stickers (connectors) identified in white on the photo with a flat screwdriver. Be careful these stickers are breakable.
    • Unstick careflly the 3 metal stickers (connectors) identified in white on the photo with a flat screwdriver. Be careful these stickers are breakable.

    • Cut some thick papers or cardboard to the size of each sticker.

    • Stick under each sticker a cut piece of paper / cardboard in order to make a thickness

    • Put the stickers back to their initial location (they will not stick again but it not important).

    • Reassemble the phone by following the previous steps backwards

Conclusione

To mount again your phone, follow the previous steps in the inversed order.

Un ringraziamento speciale a questi traduttori:

100%

draxx ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

draxx

Membro da: 08/02/2019

49 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 43

Tutti i Tempi: 279