Aggiusta la tua roba Comunità Store

How to Fix the James Donkey RS2 2.0 Switch or Motherboard

Introduzione

This is the guide of how to repair the James Donkey RS2, and let it work as the new one.

Cosa ti serve

  1. How to Fix the James Donkey RS2 2.0 Switch or Motherboard, Switch or Motherboard: passo 1, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard, Switch or Motherboard: passo 1, immagine 2 di 2

    • The first step is to disassemble all the pieces to make sure all the parts are separated.

    Modifica

  2. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 2, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 2, immagine 2 di 2

    • Make sure all the cable is unplugged to prevent an accident from happening.

    Modifica

  3. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 3, immagine 1 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 3, immagine 2 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 3, immagine 3 di 3

    • Unplug all the cables before removing any other parts of the keyboard.

    Modifica

  4. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 4, immagine 1 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 4, immagine 2 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 4, immagine 3 di 3

    • Unscrew the small board (including 2 m 2 4 mm screws) to make it easier to figure out where the trouble is.

    Modifica

  5. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 5, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 5, immagine 2 di 2

    • Then plug it back into the PCB. What we get will be a small board connected to the big board.

    Modifica

  6. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 6, immagine 1 di 1

    • Connect the board to the computer, and turn the circuit on to test to see where the problem is.

    Modifica

  7. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 7, immagine 1 di 1

    • To figure out if is it connected or not, first open the key tester on a computer that has been connected to the keyboard.

    Modifica

  8. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 8, immagine 1 di 1

    • Use the metal tweezer to connect the silver part under the PCB.

    Modifica

  9. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 9, immagine 1 di 1

    • If everything works fine, it should light in green, which means the key has been sensed.

    Modifica

  10. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 10, immagine 1 di 1

    • If there is just one single key that is unable to react, then switch it.

    Modifica

  11. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 11, immagine 1 di 1

    • If there is a line that has no reaction, which means PCB is malfunctioning, send it back for repair.

    Modifica

  12. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 12, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 12, immagine 2 di 2

    • Here is how to switch the switches. First, unplug the keycap.

    Modifica

  13. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 13, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 13, immagine 2 di 2

    • Then unplug the switch.

    Modifica

  14. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 14, immagine 1 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 14, immagine 2 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 14, immagine 3 di 3

    • After that, plug in a new switch.

    Modifica

  15. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 15, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 15, immagine 2 di 2

    • Finally, put back the keycap.

    Modifica

  16. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 16, immagine 1 di 2 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 16, immagine 2 di 2

    • Congratulations! You are done with the replacement. Now put the board back, screw it with 2 4 mm M2 screws, and connect all the cables.

    Modifica

  17. How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 17, immagine 1 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 17, immagine 2 di 3 How to Fix the James Donkey RS2 2.0 Switch or Motherboard: passo 17, immagine 3 di 3

    • When everything is done, put back the top layer.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Yichen Gu

Membro da: 10/29/23

265 Reputazione

1 Guida realizzata

Distintivi: 3

Team

CSU Los Angeles, Team 5-10, Kershman Fall 2023 Membro di CSU Los Angeles, Team 5-10, Kershman Fall 2023

CSULA-KERSHMAN-F23S5G10

1 Membro

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 36

Tutti i Tempi: 171