Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Start by pulling the drawer out and detaching it from the hardware mounted to the desk.
-
To do this you need to push the black plastic lever up in order to disengage the drawer's hardware from the desk's hardware.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
In this case the hardware on the left side of the drawer is not functioning properly due to a bent metal piece.
-
Using the flat head screwdriver you can push the metal down around each ball bearing in order to allow the drawer to slide back and forth.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The hardware attached to the drawer is also not functioning properly due to missing screws.
-
Use replacement screws to properly attach the hardware to the drawer and to allow it to support the drawer's weight.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After attaching the hardware slide the drawer's piece into its counterpart on the desk.
-