Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

When foam handlebar grips are old and crusty it not only makes the grip slippery but it also looks unappealing. Foam handlebars can have a much longer lifespan granted you put the time and care to restore the condition. This guide will help in restoring current foam grips without having to replace them with brand new ones.

  1. Assess the problem area on your bike's handlebars. Assess the problem area on your bike's handlebars. Assess the problem area on your bike's handlebars.
    • Assess the problem area on your bike's handlebars.

  2. Lightly sand down the handlebar with the sandpaper. Continue to sand the handlebar until no more residue falls.
    • Lightly sand down the handlebar with the sandpaper.

    • Continue to sand the handlebar until no more residue falls.

  3. Boil water in a pot. Once the water reaches boiling temperature (212°F/100°C), dip a rag into the water.
    • Boil water in a pot.

    • Once the water reaches boiling temperature (212°F/100°C), dip a rag into the water.

    • Be careful when handling the rag after it has been taken out of the boiling water. Handling the rag too quickly can result in a burn.

    • Take the soaked rag and begin cleaning the handlebar by applying pressure and rubbing in a downwards motion.

  4. Press a new, clean rag tightly to the opening of the alcohol bottle. Tip the bottle upside down quickly and soak the rag with the alcohol.
    • Press a new, clean rag tightly to the opening of the alcohol bottle.

    • Tip the bottle upside down quickly and soak the rag with the alcohol.

    • Once the rag is soaked, start cleaning the handlebar again. Continue to clean the handlebar until there is no more visible residue coming off.

  5. Finally, bring the water to a boil once more. Dip a rag into the water and begin rubbing the handlebar for the last time. Clean vigorously until the handlebar is noticeably smoother and no longer crumbling with residue.
    • Finally, bring the water to a boil once more.

    • Dip a rag into the water and begin rubbing the handlebar for the last time. Clean vigorously until the handlebar is noticeably smoother and no longer crumbling with residue.

Conclusione

Following these steps should result in handlebars that feel brand new!

Altre 3 persone hanno completato questa guida.

Katy Haas

Membro da: 28/04/2017

125 Reputazione

1 Guida realizzata

Team

UC Davis, Team S1-G1, Coad Spring 2017 Membro di UC Davis, Team S1-G1, Coad Spring 2017

UCD-COAD-S17S1G1

4 Membri

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 72

Tutti i Tempi: 3,193