Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel

Cosa ti serve

  1. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel, How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 1, immagine 1 di 1
    • Use a screwdriver to remove the stickers that are hiding the screws.

  2. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 2, immagine 1 di 1
    • Remove 4 screws Phillips #0 screws.

  3. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 3, immagine 1 di 2 How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 3, immagine 2 di 2
    • Use a screwdriver to pry along the center seam of the mouse.

    • Open the outer casing of the mouse.

  4. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 4, immagine 1 di 1
    • Remove the wires from the white crimp headers in order to separate the upper and lower housing units of the mouse.

    • Pull the wires as gently as possible to ensure that the wires will not break.

  5. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 5, immagine 1 di 2 How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: passo 5, immagine 2 di 2
    • Take a q-tip and lightly remove any dirt or debris around the pin connections of the scroll wheel (circled in red).

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Colin

Membro da: 02/10/14

406 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 1-39, Maness Winter 2014 Membro di Cal Poly, Team 1-39, Maness Winter 2014

CPSU-MANESS-W14S1G39

4 Membri

16 Guide realizzate

Un commento

You don’t tell how to put the stickers back because they won’t stick again…

p.pisu - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 98

Tutti i Tempi: 14,992