Aggiusta la tua roba Comunità Store

How to Clean The Exit Needle of the Keurig B60

Introduzione

The needle that punctures the K-Cup beverage canister can sometimes become clogged with coffee particles. Take caution as this needle is very sharp and can cut skin.

Cosa ti serve

  1. How to Clean The Exit Needle of the Keurig B60, How to Clean The Exit Needle of the Keurig B60: passo 1, immagine 1 di 1

    • Lift Handle to open Lid

    Modifica

  2. How to Clean The Exit Needle of the Keurig B60: passo 2, immagine 1 di 3 How to Clean The Exit Needle of the Keurig B60: passo 2, immagine 2 di 3 How to Clean The Exit Needle of the Keurig B60: passo 2, immagine 3 di 3

    • Remove K-Cup Pack Holder Assembly by pinching the left and right sides to release clamp. Wiggle slightly to remove

    Modifica

  4. How to Clean The Exit Needle of the Keurig B60: passo 3, immagine 1 di 3 How to Clean The Exit Needle of the Keurig B60: passo 3, immagine 2 di 3 How to Clean The Exit Needle of the Keurig B60: passo 3, immagine 3 di 3

    • Pull and snap apart the funnel from the K-Cup Pack Holder (If this is the first time separating the Pack Holder Assembly, more force may be required)

    Modifica

  5. How to Clean The Exit Needle of the Keurig B60: passo 4, immagine 1 di 2 How to Clean The Exit Needle of the Keurig B60: passo 4, immagine 2 di 2

    • Insert a paperclip or other small, sharp object into the bottom of the K-Cup Pack Holder needle compartment to clear out any debris. If debris is too dry and compact, perform this step under running water to loosen the debris

    • Flip K-Cup Pack Holder and repeat

    Modifica

  6. How to Clean The Exit Needle of the Keurig B60: passo 5, immagine 1 di 2 How to Clean The Exit Needle of the Keurig B60: passo 5, immagine 2 di 2

    • With the Lid still open, locate the Puncture Needle. Insert a paperclip or other small sharp object into the Puncture Needle Holes to remove any debris trapped inside

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Once reassembled, run the brewer once or twice with just water to cleanse the system.

Altre 10 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Jake Wynn

Membro da: 04/11/16

830 Reputazione

5 Guide realizzate

Distintivi: 17

+14 altri distintivi

Team

Cal Poly, Team 1-7, Maness Spring 2016 Membro di Cal Poly, Team 1-7, Maness Spring 2016

CPSU-MANESS-S16S1G7

5 Membri

5 Guide realizzate

2 Commenti

I used the needle but it fell into the area.  How do I get the needle out?

pspicuzza - Replica

The bottom needle is loose on small piece of plastic is this normal or broke?

confused40 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 69

Tutti i Tempi: 26,455