Aggiusta la tua roba Comunità Store

How to Change the Oil for the Honda EU2200IT A2

Introduzione

This guide shows how to change the engine oil for the Honda EU2200IT generator. This procedure is a prerequisite for many other repairs.

Oil specifications:
SAE 10W-30
0.46 US quarts (0.44 L)

Cosa ti serve

  1. How to Change the Oil for the Honda EU2200IT A2, Honda EU2200IT A2 Safety Precautions: passo 1, immagine 1 di 1

    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

    Modifica

  2. How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: passo 2, immagine 1 di 2 How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: passo 2, immagine 2 di 2

    • Lift and remove the spark plug cover.

    Modifica

  3. How to Change the Oil for the Honda EU2200IT A2: passo 3, immagine 1 di 2 How to Change the Oil for the Honda EU2200IT A2: passo 3, immagine 2 di 2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Modifica

  5. How to Change the Oil for the Honda EU2200IT A2, Remove the maintenance cover: passo 4, immagine 1 di 1

    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

    Modifica

  6. How to Change the Oil for the Honda EU2200IT A2: passo 5, immagine 1 di 3 How to Change the Oil for the Honda EU2200IT A2: passo 5, immagine 2 di 3 How to Change the Oil for the Honda EU2200IT A2: passo 5, immagine 3 di 3

    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

    Modifica

  7. How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: passo 6, immagine 1 di 2 How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: passo 6, immagine 2 di 2

    • Unscrew and remove the oil filler cap.

    Modifica

  8. How to Change the Oil for the Honda EU2200IT A2: passo 7, immagine 1 di 2 How to Change the Oil for the Honda EU2200IT A2: passo 7, immagine 2 di 2

    • Place an oil pan below the fill port to catch the engine oil.

    • Carefully tilt the generator towards the oil pan to drain the oil.

    Modifica

  9. How to Change the Oil for the Honda EU2200IT A2: passo 8, immagine 1 di 1

    • During reassembly, be sure to refill the engine oil:

    • If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.

    • Use SAE 10W-30 oil, up to 0.46 US quarts.

    • Add oil until the dipstick is almost completely submerged.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

Arthur Shi

Membro da: 01/03/18

254.555 Reputazione

529 Guide realizzate

Distintivi: 47

+44 altri distintivi

Team

iFixit Membro di iFixit

Staff

136 Membri

17.420 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 58

Tutti i Tempi: 3,535