1. Start by loosening the string you are trying to replace by twisting  the pegs.
    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

  2. Next, grab the new string you are using to replace.
    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

  3. Feed the string through the tie block.
    • Feed the string through the tie block.

    • Remember to leave slack.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Wrap the string over the tie block and back underneath itself.
    • Wrap the string over the tie block and back underneath itself.

  6. Recross the string over itself again, looping it two or three more times. Recross the string over itself again, looping it two or three more times.
    • Recross the string over itself again, looping it two or three more times.

  7. Pinch the string and pull tightly.
    • Pinch the string and pull tightly.

  8. Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.
    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

  9. Twist again to tighten and cut off extra string once complete.
    • Twist again to tighten and cut off extra string once complete.

Linea Traguardo

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 68