Aggiusta la tua roba ComunitĂ  Store

How to Change Strings on a Ukulele

Cosa ti serve

  1. How to Change Strings on a Ukulele, String: passo 1, immagine 1 di 1

    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

    Traduci

  2. How to Change Strings on a Ukulele: passo 2, immagine 1 di 1

    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

    Traduci

  3. How to Change Strings on a Ukulele: passo 3, immagine 1 di 1

    • Feed the string through the tie block.

    • Remember to leave slack.

    Traduci

  5. How to Change Strings on a Ukulele: passo 4, immagine 1 di 1

    • Wrap the string over the tie block and back underneath itself.

    Traduci

  6. How to Change Strings on a Ukulele: passo 5, immagine 1 di 2 How to Change Strings on a Ukulele: passo 5, immagine 2 di 2

    • Recross the string over itself again, looping it two or three more times.

    Traduci

  7. How to Change Strings on a Ukulele: passo 6, immagine 1 di 1

    • Pinch the string and pull tightly.

    Traduci

  8. How to Change Strings on a Ukulele: passo 7, immagine 1 di 1

    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

    Traduci

  9. How to Change Strings on a Ukulele: passo 8, immagine 1 di 1

    • Twist again to tighten and cut off extra string once complete.

    Traduci
Linea Traguardo

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 20

Tutti i Tempi: 532