Salta al contenuto principale

How to Bind a Book Spine

Cosa ti serve

  1. How to Bind a Book Spine, How to Bind a Book Spine: passo 1, immagine 1 di 1
    • First, grab the book you would like to fix.

  2. How to Bind a Book Spine: passo 2, immagine 1 di 1
    • Then, open the book to where you have the most access to the exposed inner spine.

  3. How to Bind a Book Spine: passo 3, immagine 1 di 1
    • Shake up the glue before removing the cap.

    • Then, test glue on a piece of paper before placing it on the spine of the book. It should be about the consistency of Elmer's glue.

  4. How to Bind a Book Spine: passo 4, immagine 1 di 1
    • Place the glue along the spine opposite of the cover. Make sure you are distributing glue evenly.

    • You may also choose to use a paint brush to make sure area is completely covered with glue.

    • Glue is runny; use with caution.

  5. How to Bind a Book Spine: passo 5, immagine 1 di 1
    • After placing the glue, wrap the cover tightly around the book.

    • Firmly drag your fingers down the spine of the book to avoid any air pockets.

    • Remove any excess glue with a tissue.

    • For the demonstration we held the book as shown. You may also choose to place something on top of the book, such as a paperweight or another book, and let it sit for 30 to 40 minutes.

  6. How to Bind a Book Spine: passo 6, immagine 1 di 1
    • After the glue is dry, you should be able to lightly tug on the pages without any movement.

    • If movement occurs then allow the glue an additional 10 to 15 minutes to dry. Once dry, you've completed your book repair.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 80

Tutti i Tempi: 1,244