Aggiusta la tua roba Comunità Store

How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

Introduzione

With mechanical disc brakes, we adjust brakes if our brake lever pulls all the way into the handle bar. This guide will show how to adjust those brakes, specifically Tektro Aries MD-M300. However, this process should work with other mechanical brakes too. The process is quite easy and anyone can complete the guide without extensive knowledge of bicycles.

Cosa ti serve

  1. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes, How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 1, immagine 1 di 1

    • You will see a cable attached to an Allen bolt.

    Modifica

  2. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 2, immagine 1 di 1

    • Loosen up the bolt with the help of Hex key set.

    Modifica

  3. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 3, immagine 1 di 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 3, immagine 2 di 2

    • Now, pull the cable as much as you can.

    Modifica

  5. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 4, immagine 1 di 1

    • Tighten up the bolt while you keep pulling the cable.

    Modifica

  6. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 5, immagine 1 di 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 5, immagine 2 di 2

    • To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.

    Modifica

  7. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 6, immagine 1 di 1

    • Now, put the brake on.

    Modifica

  8. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 7, immagine 1 di 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 7, immagine 2 di 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: passo 7, immagine 3 di 3

    • While putting the brake on, tighten up both the bolts.

    • You are finished adjusting the brakes!

    Modifica
Linea Traguardo

Altre 2 persone hanno completato questa guida.

Un commento

Dude, the cable is attached incorrectly. The cable routes up and over the little arm.

Grandy - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 54

Ultimi 30 Giorni: 228

Tutti i Tempi: 4,202