Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Shock cords hold the segments of a tent pole together making tent set up faster. Over the years, the cord can become brittle and break. We’ll show you step by step instructions for removing the old shock cord and replacing it with a new one.

Parti

  1. First, check if you really need to replace the cord. The following criteria can be helpful in your decision: cord has lost, elasticity, rough surfaces.     damaged areas
    • First, check if you really need to replace the cord. The following criteria can be helpful in your decision: cord has lost, elasticity, rough surfaces. damaged areas

    • Put all segments together so that you have one long tent pole.

  2. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole. Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole.
    • Pull out the end pin on one side and cut off the knot. Then pull the shock cord out completely from the other end of the pole.

  3. Attach the new shock cord to the pin and tie a knot in it.
    • Attach the new shock cord to the pin and tie a knot in it.

  4. Thread the loose shock cord end through the tent pole.
    • Thread the loose shock cord end through the tent pole.

  5. When the shock cord is hanging out of the tent pole with a fair amount of excess, insert the pin back into the pole at the other end.
    • When the shock cord is hanging out of the tent pole with a fair amount of excess, insert the pin back into the pole at the other end.

  6. At the other end, pull the shock cord taught  – with about one arm’s length of tension in the cord.
    • At the other end, pull the shock cord taught – with about one arm’s length of tension in the cord.

    • In order to keep this tension for the next step, hold the shock cord to the pole with your fingers.

    • Hold the shock cord and tension with the help of a clothes pin.

    • Now attach the end pin to this side of the shock cord, tie a knot in it, and insert it into the pole.

Conclusione

Done! You made it.

Un ringraziamento speciale a questi traduttori:

100%

VAUDE Reparaturteam ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

VAUDE Reparaturteam

Membro da: 22/02/2016

5.517 Reputazione

31 Guide realizzate

Team

Vaudesport Membro di Vaudesport

Community

3 Membri

62 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 332