Introduzione

The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.

Parti

Nessuna parte richiesta.

Panoramica Video

Start by removing the stylus from the frame of the New 3DS XL.
  • Start by removing the stylus from the frame of the New 3DS XL.

Aggiungi Commento

Loosen the two captive Phillips #1 screws on the back of the device.
  • Loosen the two captive Phillips #1 screws on the back of the device.

    • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

  • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

Aggiungi Commento

  • Press the microSD card slightly deeper into its slot until you hear a click.

  • After the click, release the card and it will pop out of its slot.

  • Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.

  • For reassembly, push the microSD card into the slot until it clicks in place.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Geoff Wacker

Membro da: 30/09/2013

70.547 Reputazione

84 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 32

Tutti i Tempi: 2,407