Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

For your shoddy walls that have holes in them, here is a quick and easy guide to completely repair the holes.

  1. Sand down the hole and the area surrounding. This is in order to get paint off the wall. Sand down the hole and the area surrounding. This is in order to get paint off the wall. Sand down the hole and the area surrounding. This is in order to get paint off the wall.
    • Sand down the hole and the area surrounding. This is in order to get paint off the wall.

  2. Use the rag and the toothbrush to clean off any excess rubble near the hole. Use the rag and the toothbrush to clean off any excess rubble near the hole.
    • Use the rag and the toothbrush to clean off any excess rubble near the hole.

  3. Follow the directions on the spackle box to prepare the spackle for application.
    • Follow the directions on the spackle box to prepare the spackle for application.

    • Although all spackle brands are different, spackle should have a consistency similar to toothpaste when mixed with water.

  4. Take the spackle mix and apply it to the hole. Make sure to layer the spackle evenly and remove excess spackle. Make sure to layer the spackle evenly and remove excess spackle.
    • Take the spackle mix and apply it to the hole.

    • Make sure to layer the spackle evenly and remove excess spackle.

  5. Wait 30-45 minutes for the spackle patch to dry.
    • Wait 30-45 minutes for the spackle patch to dry.

    • Wait time may vary depending on the depth of the hole and spackle mix used.

  6. Make sure the spackle is dry.
    • Make sure the spackle is dry.

    • Sand the spackle until it is smooth and flush with the wall.

Conclusione

Now your wall should be looking as good as new!

Altre 3 persone hanno completato questa guida.

Joseph Garcia

Membro da: 29/09/2015

293 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 17-2, Green Fall 2015 Membro di Cal Poly, Team 17-2, Green Fall 2015

CPSU-GREEN-F15S17G2

4 Membri

6 Guide realizzate

I suggest using a sanding sponge or block in step 6

Dennis - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 22

Tutti i Tempi: 905