Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two, 23 mm Hex #5 screws holding the brake to the bike.
-
Slide the brake mechanism off and turn it upside down to reveal the screw holding the brake wire.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the one, 14 mm Hex #4 screw pushing down the brake wire to the brake mechanism on the bottom.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the side screw holding the brake wire and mechanism together with your hands.
-
Slide the brake mechanism off from the brake wire.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two, 16 mm Hex #4 screws on both of the hub caps in the front wheel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using an adjustable spanner wrench, rotate the 165 mm bolt counter-clockwise to remove.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After removing the first bolt, the second bolt located on the other side of the wheel will be able to be take off by hand.
-
Pull the wheel and bike in opposite directions to remove the wheel.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Un commento
How do I get in touch with customer service for parts?
tried filling out the form on computer and phone as well tablet and it says error.
fox_Jayson@yahoo.com
please reach out