Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two, 23 mm Hex #5 screws holding the brake to the bike.
-
Slide the brake mechanism off and turn it upside down to reveal the screw holding the brake wire.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the one, 14 mm Hex #4 screw pushing down the brake wire to the brake mechanism on the bottom.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the side screw holding the brake wire and mechanism together with your hands.
-
Slide the brake mechanism off from the brake wire.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.