Aggiusta la tua roba ComunitĂ  Store

Hover-1 Maverick Battery Replacement

Introduzione

This guide for the Hover-1 Maverick guides users in replacing the battery in their device. The battery is crucial in powering the hoverboard. Symptoms of having a faulty battery include the device not being able to move, hold a charge, or power on.

Cosa ti serve

  1. Hover-1 Maverick Battery Replacement, Battery: passo 1, immagine 1 di 2 Hover-1 Maverick Battery Replacement, Battery: passo 1, immagine 2 di 2

    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Remove the shell.

    Modifica

  3. Hover-1 Maverick Battery Replacement: passo 2, immagine 1 di 3 Hover-1 Maverick Battery Replacement: passo 2, immagine 2 di 3 Hover-1 Maverick Battery Replacement: passo 2, immagine 3 di 3

    • Remove the four 8mm Phillips #1 screws holding down the black plastic casing.

    • Lift off the black plastic retaining bracket.

    Modifica

  4. Hover-1 Maverick Battery Replacement: passo 3, immagine 1 di 2 Hover-1 Maverick Battery Replacement: passo 3, immagine 2 di 2

    • Pull the battery upward lightly to remove from the device.

    • The battery is secured to the device with adhesive tape.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 5 altri collaboratori

Piper Feldman

Membro da: 01/23/20

409 Reputazione

4 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team S2-G2, White Winter 2020 Membro di Cal Poly, Team S2-G2, White Winter 2020

CPSU-WHITE-W20S2G2

2 Membri

4 Guide realizzate

2 Commenti

What voltage should the battery put out? Mines is 30v, charger is green at the wall but still the board won’t turn on

Barry Rogers - Replica

Where can I find that same battery i cant find one

Toad Blue - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 43

Tutti i Tempi: 2,802