Hover-1 Horizon Power Button Replacement

Introduzione

Does your Hover-1 Horizon not turn off? This is a guide to show you how to replace the power button, the most likely cause of your issue. This guide requires a Phillips #2 and a Phillips #1 screwdriver.

Cosa ti serve

Passo 1 Base Plate

Hover-1 Horizon Power Button Replacement, Base Plate: passo 1, immagine 1 di 2

Hover-1 Horizon Power Button Replacement, Base Plate: passo 1, immagine 2 di 2

Remove the six 12mm Phillips #2 screws holding the base plate.

Modifica

Passo 2

Remove the two 11mm Phillips #1 screws that hold the base plate to the body.

Modifica

Passo 3

Hover-1 Horizon Power Button Replacement: passo 3, immagine 3 di 3

Remove the base plate by lifting it up.
The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.

Modifica

Passo 4 Power Button

Hover-1 Horizon Power Button Replacement, Power Button: passo 4, immagine 1 di 1

Reorient the Hover-1 Horizon so the base plate opens towards you.

Modifica

Passo 5

Hover-1 Horizon Power Button Replacement: passo 5, immagine 3 di 3

Remove the connector by squeezing the tab and lifting up.

Modifica

Passo 6

Hover-1 Horizon Power Button Replacement: passo 6, immagine 3 di 3

Remove the second connector by squeezing the tab and pulling up.

Modifica

Passo 7

Hover-1 Horizon Power Button Replacement: passo 7, immagine 3 di 3

Unscrew the power button by holding the front and twisting the back nut counter-clockwise.
Push the power button through the base plate to remove.
A hot air gun may need to be used to remove the adhesive connecting the base plate to the power button.