Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide explains how to remove the bottom shell of your hoverboard, which will allow you to gain access to most of the device's internals.
Cosa ti serve
-
-
Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
-
Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.