Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Hover-1 H1 Battery Replacement

Cosa ti serve

  1. Hover-1 H1 Battery Replacement, Bottom Shell: passo 1, immagine 1 di 1
    • Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

    • Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

  2. Hover-1 H1 Battery Replacement: passo 2, immagine 1 di 1
    • Puncture the two black stickers by using the tip of a screwdriver.

    • Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

  3. Hover-1 H1 Battery Replacement: passo 3, immagine 1 di 2 Hover-1 H1 Battery Replacement: passo 3, immagine 2 di 2
    • Lift each side of the bottom shell by pulling up.

    • When lifting the shell, take care to not tear any cables from their connectors.

  4. Hover-1 H1 Battery Replacement: passo 4, immagine 1 di 1
    • Unplug the battery by pulling gently on both sides of the orange connector.

  5. Hover-1 H1 Battery Replacement, Battery: passo 5, immagine 1 di 1
    • Remove the four 7mm screws by using a Phillips #2 screwdriver to rotate the screws counterclockwise.

  6. Hover-1 H1 Battery Replacement: passo 6, immagine 1 di 1
    • Gently lift the battery harness and remove the battery by lifting the battery and moving it away from the hoverboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Aaron Teh

Membro da: 10/08/18

421 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S17-G6, White Fall 2018 Membro di Cal Poly, Team S17-G6, White Fall 2018

CPSU-WHITE-F18S17G6

4 Membri

7 Guide realizzate

11 Commenti

The stickers were the trick. I didn’t see them!

Daniel D - Replica

After removing the 4 screws that is holding the battery in place I still can't remove the battery. I tried gently to pry under the battery but it doesn't budge. Uni Sun model HY-A01B. How do I solve this problem?

Terry Pollard - Replica

Where do I get another battery to replace it???

Tony Pate - Replica

That's the question I can't seem to find the answer to

Darin -

Very low quality. Bought for my son who haven’t even used it for 15 times. Got it during winter and before summer the product stopped working.

tosin3in1 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 38

Ultimi 30 Giorni: 163

Tutti i Tempi: 8,682