Aggiusta la tua roba Comunità Store

Hover-1 Chrome Outer Shell Replacement

Introduzione

To fully access all parts of the Hover-1 Chrome, the entirety of the outer shell must be removed. This guide will go over how to completely remove the outer shell.

Cosa ti serve

  1. Hover-1 Chrome Outer Shell Replacement, Hover-1 Chrome Disassembly: passo 1, immagine 1 di 1

    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

    Traduci

  2. Hover-1 Chrome Outer Shell Replacement: passo 2, immagine 1 di 1

    • Lift the shell without the speaker grille and unplug the battery.

    Traduci

  3. Hover-1 Chrome Outer Shell Replacement: passo 3, immagine 1 di 2 Hover-1 Chrome Outer Shell Replacement: passo 3, immagine 2 di 2

    • Lift the shell with the speaker grille.

    • Unplug the speaker.

    • Unplug the LEDs.

    • Unplug the power button

    • Unplug the charging port.

    Traduci

  5. Hover-1 Chrome Outer Shell Replacement, Outer Shell: passo 4, immagine 1 di 1

    • Remove the twelve 14 mm Phillips #2 screws holding the top shell on.

    • The other six screws are on the side without the battery.

    Traduci

  6. Hover-1 Chrome Outer Shell Replacement: passo 5, immagine 1 di 3 Hover-1 Chrome Outer Shell Replacement: passo 5, immagine 2 di 3 Hover-1 Chrome Outer Shell Replacement: passo 5, immagine 3 di 3

    • Free the cables held atop the bracket holding the battery in place.

    • Remove the four 14 mm Phillips #2 screws holding the battery bracket in place.

    • Pull the battery bracket free.

    Traduci

  7. Hover-1 Chrome Outer Shell Replacement: passo 6, immagine 1 di 1

    • Unplug the cords for the top LEDs.

    • The other side of the board is structurally symmetrical. However instead of going under the battery bracket, these cords go through a zip tie. These cables must be removed from the zip tie in order to continue.

    Traduci

  8. Hover-1 Chrome Outer Shell Replacement: passo 7, immagine 1 di 1

    • Turn the board over and pull the top panel off.

    Traduci
Linea Traguardo

Autore

con 2 altri collaboratori

Dylan Prins

Membro da: 10/08/18

212 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

Cal Poly, Team S4-G1, White Fall 2018 Membro di Cal Poly, Team S4-G1, White Fall 2018

CPSU-WHITE-F18S4G1

4 Membri

6 Guide realizzate

Un commento

Where can i get a replacement shell?

born4roblox - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 316