Salta al contenuto principale

Introduzione

Use this guide to replace the electrical cord on the Hot Tools HPK12 Titanium Flat Iron.

The cord provides power to the flat iron. You will know if the device is working if the metal plates are hot when the cord is plugged in. Do not plug in a frayed or cracked cord.

Changing the electrical cord is a four-step process. Each step includes easy to follow instructions and a photo that demonstrates what you need to do.

Note that step three will require strength.

Ricambi

Nessuna parte specificata.

  1. Remove the two black 6mm screws.
    • Remove the two black 6mm screws.

  2. Slide the black O-ring out of its channel and pull it off the end of the flat iron.
    • Slide the black O-ring out of its channel and pull it off the end of the flat iron.

  3. Separate the top and bottom pieces of the shell. It may require some force to break the seal.
    • Separate the top and bottom pieces of the shell. It may require some force to break the seal.

  4. Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.
    • Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ben Miller

Membro da: 24/10/2016

234 Reputazione

1 Guida realizzata

Team

IUPUI, Team 3-4, Baechle Fall 2016 Membro di IUPUI, Team 3-4, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G4

4 Membri

5 Guide realizzate

Un commento

Where can I get a replacement cord? You only show how to removed it but not how to fix it

Noe Salazar - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 26

Tutti i Tempi: 3,296