Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This guide will show you how to replace the Cord on your Hot Tools HPK12 Titanium Flat Iron.

  1. Remove the two black 6mm screws.
    • Remove the two black 6mm screws.

  2. Slide the black O-ring out of its channel and pull it off the end of the flat iron.
    • Slide the black O-ring out of its channel and pull it off the end of the flat iron.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Separate the top and bottom pieces of the shell. It may require some force to break the seal.
    • Separate the top and bottom pieces of the shell. It may require some force to break the seal.

  5. Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.
    • Remove the cord by pulling up and away from the bracket. You are now ready to replace the cord.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ben Miller

Membro da: 24/10/2016

216 Reputazione

1 Guida realizzata

Team

IUPUI, Team 3-4, Baechle Fall 2016 Membro di IUPUI, Team 3-4, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G4

4 Membri

5 Guide realizzate

Where can I get a replacement cord? You only show how to removed it but not how to fix it

Noe Salazar - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 23

Tutti i Tempi: 2,929