Introduzione

This guide will help you into replacing the inlet filter in the body of the vacuum.

Strumenti

Parti

Nessuna parte richiesta.

  1. Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body. Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.
    • Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Locate the large sieve at the bottom of the vacuum body. Lift off the sieve, separating it from the filter.
    • Locate the large sieve at the bottom of the vacuum body.

    • Lift off the sieve, separating it from the filter.

  4. Remove the old inlet filter from the vacuum body and replace with the new filter.
    • Remove the old inlet filter from the vacuum body and replace with the new filter.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Membro da: 18/01/2018

241 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro di Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 43